Newsgroups: comp.dcom.isdn,comp.answers,news.answers Path: bloom-beacon.mit.edu!hookup!news.moneng.mei.com!howland.reston.ans.net!noc.near.net!mv!fastball.unimaster.com!cherkus From: cherkus@UniMaster.COM (Dave Cherkus) Subject: comp.dcom.isdn Frequently Asked Questions Approved: news-answers-request@MIT.Edu Keywords: ISDN FAQ telecom Originator: cherkus@fastball.unimaster.com Distribution: world Message-ID: Nntp-Posting-Host: fastball.unimaster.com Sender: usenet@mv.mv.com (System Administrator) Supersedes: Reply-To: cherkus@UniMaster.COM (Dave Cherkus) Expires: Mon, 16 May 1994 00:00:00 GMT Summary: This posting contains a list of Frequently Asked Questions (and their answers) about ISDN. Organization: UniMaster, Inc. Date: Sat, 30 Apr 1994 05:05:07 GMT Followup-To: comp.dcom.isdn Lines: 1884 Xref: bloom-beacon.mit.edu comp.dcom.isdn:4463 comp.answers:5116 news.answers:18810 Archive-name: isdn-faq Last-modified: $Date: 1994/04/30 04:54:25 $ Version: $Revision: 3.4 $ [ Ed Note: Some of you may see this posting twice due to a problem I'm having... ] Summary of changes from the last version: - Phone numbers for IBM Waverunner info, ordering - Corrections/reorganization/etc. for sections 2 and 3 - Minor corrections/clarifications re: SPIDs - Added Intel info (ISDN availability and product info) - Added info on ISDN over IP in Europe, Bintec products - Updated Network Express vendor info - Added much more ISDN Availability contact info for Europe ----- Frequently Asked Questions and Answers comp.dcom.isdn These questions and answers have (almost entirely) been extracted from comp.dcom.isdn. Please post any comments or new material that you have, or email them to the current FAQ editor, cherkus@unimaster.com. In particular, the vendor equipment chart is incomplete. If you want to share vendor equipment info, just cut and paste the headers from the chart below and create a new entry for the new information, and send it to me. This FAQ consists almost entirely of information posted to this group. There are a fair number of holes and there may be some outdated information in it. There is no claim of completeness or guarantee of accuracy of any kind, or no warranties for merchantability or fitness for a particular purpose. If you have some useful information that you would like to share, email it to me. My goal is to have the FAQ mirror the information provided to the newsgroup itself. The next-to-last section of this FAQ gives references that provide much more information than this FAQ does. I would like to thank Sean Welch for creating the previous edition of the FAQ. His work is still responsible for the majority of the information gathered here. I hope to continue the fine example that Sean has set. Questions with answers: 1) What is ISDN? 2) What does an ISDN network connection look like? 3) What will Basic Rate (2B+D) ISDN look like in my house/office? 4) Can the existing local loop lines be reused for ISDN? 5) How does this compare to regular phone line services? 6) Is caller ID available on ISDN? 7) What do I get above and beyond plain old telephone service? 8) What do ISDN phones cost? 9) Can you use existing telephone equipment with the voice portion? 10) What is National ISDN? 11) What is the NIUF? 12) What is ATM? 13) What is B-ISDN? 14) What is BONDING? 15) Data Encapsulation for IP over ISDN 16) Full Motion Video over ISDN 17) How do I find out about getting ISDN in my area? 18) Where can I find what all of these acronyms mean? 19) What are the relevant standards? 20) Who is shipping what? 21) How about that SPARCstation 10? 22) How about that IBM Waverunner? 23) What is a SPID? How come my ISDN device won't work without one? 24) Will an ISDN terminal equipment that works in one country work properly when it is installed in another country? 25) Will ISDN terminal equipment that works with one vendor's ISDN switch work properly when it is used with another vendor's switch? 26) Do different manufacturers Terminal Adaptors interoperate when used asynchronously? 27) Why do I get only about 19.2k throughput from my TA? 29) How long should call setup take when using a TA? 29) Can I get on-line National ISDN information from Bellcore? 30) Where can I read more? 31) Who do I have to thank for this list? Questions for which I have not yet put together an answer, but for which I am accepting suggestions: a) What programming API's are useful for creating ISDN applications? (e.g. Sun, Microsoft TAPI, NIUF ASI, ETSI(?), CAPI(?), more(?)) What are their strengths and weaknesses? --- 1) What is ISDN? ISDN stands for "Integrated Services Digital Networks", and it's a TSS (formerly CCITT) term for a relatively new telecommunications service package. ISDN is basically the telephone network turned all-digital end to end, using existing switches and wiring (for the most part) upgraded so that the basic "call" is a 64 kbps end-to-end channel, with bit-diddling as needed (but not when not needed!). Packet and maybe frame modes are thrown in for good measure, too, in some places. It's offered by local telephone companies, but most readily in Australia, France, Japan, and Singapore, with the UK and Germany somewhat behind, and USA availability somewhat more behind. eleskg@nuscc.nus.sg (Winston Seah) goldstein@carafe.enet.dec.com (Fred R. Goldstein) paul@suite.sw.oz.au (Paul Antoine) --- 2) What does an ISDN network connection look like? [ Ed Note: I edited this section a lot, mainly to move the discussion of NT devices to the next section. ] A Basic Rate Interface (BRI) is two 64K bearer ("B") channels and a single delta ("D") channel. The B channels are used for voice or data, and the D channel is used for signaling and/or X.25 packet networking. This is the variety most likely to be found in residential service. Equipment known as a Terminal Adapter (TA) can be used to adapt these channels to existing terminal equipment standards such as RS-232 and V.35. This equipment is typically packaged in a similar fashion to modems, either as standalone units or as interface cards that plug into a computer or various kinds of commmunications equipment (such as routers or PBXs). TAs do not interoperate with the modem; they replace the modem. There may be cases where there is no need to interface to existing terminal equipment, or to emulate exisiting terminal equipment, or there may equipment with synchronous interfaces is present. In these cases, standalone units or computer interfaces can provide high speed synchronous connections to the B channels without converting to an asynchronous standard. Another common type of equipment can be used to implement a bridge between local area networks using the ISDN channel to transport the data. These devices typically provide features such as demand dialing and/or data compression. Of course, more traditional devices such as telephones and fax machines can be attached to the BRI, assuming they have the proper interface hardware and software. Another flavor of ISDN is Primary Rate Interface (PRI). Inside North America and Japan, this consists of 24 channels, usually divided into 23 B channels and 1 D channel, and runs over the same physical interface as T1. Outside of these areas the PRI has 31 user channels, usually divided into 30 B channels and 1 D channel and is based on the E1 interface. It is typically used for connections such as one between a PBX (private branch exchange, a telephone echange operated by the customer of a telephone company) and a CO (central office, of the telephone company) or IXC (inter exchange carrier, a long distance telephone company). kevinc@aspect.UUCP (Kevin Collins) keyman@doorway.Eng.Sun.COM (Dave Evans) turtle@newshub.sdsu.edu (Andrew Scherpbier) cherkus@UniMaster.COM (Dave Cherkus) oj@world.std.com (Oliver Jones) KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) ---- 3) What will Basic Rate (2B+D) ISDN look like in my house/office? [ Ed Note: My attempt to make this section accurate in the last version of the FAQ fell short. I've tried to correct it and I'm still looking for comments... Thanks to Mark Anderson, mea@intgp1.att.com, for pointing out the major mistakes. ] An ISDN BRI U-Loop is 2 conductors from the CO (telephone company central office) to the customer premises. Its maximum length may be 5.5 km (18000 ft). The equipment on both sides of the U loop has to be carefully designed to deal with the long length of the U loop and the noisy environment it operates in. At the customer premises the U-loop is terminated by an NT1 (network termination 1) device. The NT1 drives a S/T-bus which is usually 4 wires, but in some cases it may be 6 or 8 wires. In these optional cases, the extra wires are used provide power to operate telephones when normal power fails. Alternately, 'phantom' power may be derived from the standard four wires. Outside of North America emergency mode operation provides power for basic voice service only in the case of loss of local power. In emergency mode operation the NT1 receives up to 1.2W from the central office. In North America there is no provision for emergency mode operation. The name of the S/T bus comes from the letters used in the ISDN specifications used to refer to two reference points, S and T. Point T refers to the connection between the NT1 device and customer supplied equipment. Terminals can connect directly to NT1 at point T, or there may be a PBX (private branch exchange, i.e. a customer-owned telephone exchange). When a PBX is present, point S refers to the connection between the PBX and the terminal. Note that in ISDN terminology, "terminal" can mean any sort of end-user ISDN device, such as data terminals, telephones, FAX machines, etc. This picture shows what an residential ISDN connection looks like. Point T Point U | +--------+ 4-8 wires +-------+ 2-4 wires | |Terminal|-----+-----| NT1 |-------------[| wall (to telco CO) +--------+ | +-------+ | +--------+ | | |Terminal|-----+ +--------+ | : +--------+ | |Terminal|-----+ +--------+ The T bus is a multipoint bus in this configuration. It is sometimes called the passive bus because there are no repeaters on the line between the NT1 and the devices. It can be implemented using the same cable and connectors as is 10 base T Ethernet. There may be up to 8 devices on the S/T bus. The bus may be formed with splitters and T connectors - it is a bus, not a star. The D channel is used to control the attachment of the one to eight devices to the two B channels. No two devices attach to the same B channel at the same time. In this configuration, the major function of the NT is to allow more than one device to have access to the 2 B channels provided by the ISDN BRI. For instance, you may have an ISDN telephone, an ISDN fax and an ISDN computer interface attached to the BRI. Each device can listen for calls and only connect to a B channel when it identifies a message requesting a service it can provide. The NT1 only implements part of the channel sharing scheme; the other devices participate as well, and the communication protocol used by the NT1 and the other devices is an integral part of the scheme. The NT1 also performs other functions; it translates the bit encoding scheme used on the lines between it and the telephone company (the U loop) to the encoding used between it and the devices. These schemes are different because the device to NT encoding was designed to enable channel sharing whereas the NT to telco encoding was designed to allow transmission across long distances. In the United States, the customer pays for the NT device, so don't forget to include the cost of this unit in your cost estimates, or if you don't need the multiple device attachment feature, try to find a device that does not require the NT device (i.e. it attaches directly to the U loop). If you are not in the United States the telephone company provides the NT device, but remember there is no such thing as a free lunch - you are probably paying for it through increased rates, or increased taxes, etc. (flames to sci.economics or alt.talk.politics). Unfortunately, the NT1 is not an inexpensive device. It has to convert between the signalling used on the U loop (which is operates over long distances (5.5 km, 18000 ft) in a noisy environment and does not have to deal with contention between devices) and the signalling of the S/T bus (which operates over shorter distances in a quieter environment but it does have to deal with contention between devices and other protocol functions). It also provides diagnostic functions such as loopback mode, and it may have to provide power, as descibed above. This picture shows what an ISDN connection looks like when a PBX is present. Point S Point T Point U | +--------+ 4-8 wires +-------+ 4-8 wires +-------+ 2-4 wires | |Terminal|-----------| NT2 |-----------| NT1 |-----------[| wall +--------+ | (PBX) | +-------+ | Point S +---+---+ | +--------+ _________/ | |Terminal|/ | Point S +--------+ | +---+----+ |Terminal| +--------+ In this configuration, the wires at points S and T are point to point links. Electrically, the S and T points are the same, which is why the name S/T bus is almost always used. This makes sense; the terminal should see the same physical interface whether it is hooked up with or without a PBX. But, logically they are different. The telephone company needs to know that there is a PBX between itself and the user so that it can coordinate its efforts with the PBX. So, in cases where the difference is important, the specifications use the S and T terminology. When there is no PBX in the configuration, the NT1 device is usually a standalone device that is packaged a lot like a modem: in a small box when there are only a few, and in a rackmount when you need a lot of them. In the United States, the customer buys the NT1 but in most of the rest of the world the telephone company provides the NT1. When there is a PBX the rackmounted NT1s are quite common. Also, when there is a PBX the use of PRI lines instead of BRI lines is common. cherkus@unimaster.com (Dave Cherkus) cliff@Berkeley.EDU (Cliff Frost) curt@kcwc.com (Curt Welch) dror@digibd.com (Dror Kessler) Eric_Boll-RXNN70Q@email.sps.mot.com (Eric Boll) glarson@bnr.ca (Greg Larson) krowett@large.cisco.com (Kevin J. Rowett) mea@intgp1.att.com (Mark Anderson) paul@suite.sw.oz.au (Paul Antoine) pturner@eng.auburn.edu ( Patton M. Turner) ronnie@cisco.com (Ronnie B. Kon) -- 4) Can the existing local loop lines be reused for ISDN? The ISDN pairs are the same wires as used for regular telephone service. If you became an ISDN user at home, the same wire pair that now provides your telephone service would be used to provide ISDN (assuming you no longer have the regular line). Most of the lines do not require any special conditioning. Yes, if a line has load coils on it they must be removed, BUT load coils are usually only found on existing lines that are 15,000 feet or longer. As to lines with bridge taps, the 2B1Q line transmission scheme (not to be confused with 2B + D channelization) is tolerant of a certain amount of bridge taps and, therefore it is only a minimal subset of existing lines (lines with bridge taps whose total length is greater than 3000 feet for the bridge taps) that would require special "de-conditioning." With those things as the criteria, (in North America) we find than generally around 90% or so of existing telephone lines need no "de-conditioning" in order to be used for ISDN BRI service. whs70@cc.bellcore.com (sohl,william h) --- 5) How does this compare to regular phone lines? The ISDN line may act like two independent phone lines with two numbers. Depending on the CO equipment, conferencing features etc. may be available (conferencing in the telephone switch). BRI ISDN phones can support key-set features such as you would expect to get on an office PBX like: - multiple directory numers per line. - multiple lines per directory number. - conferencing features. - forwarding features. - voice mail features. - speed call. - call park. - call pickup. - ring again. - textual status displays. curt@kcwc.com (Curt Welch) glarson@bnr.ca (Greg Larson) --- 6) Is caller ID available on ISDN? Caller ID (name or number display) may be supported (depending on the CO setup). The availability of caller ID for residential phones would depend on the capabilities of the local phone network and legislation allowing or disallowing caller ID. The availability of Caller ID relies on the underlying switching protocol used by the switches that make up the telephone system (e.g. SS7). curt@kcwc.com (Curt Welch) glarson@bnr.ca (Greg Larson) KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) --- 7) What do I get above and beyond plain old telephone service? Plain old telephone service is transmitted between the central office to your home or office telephone set (or modem, or fax) in analog form. At the central office, the analog signal is converted to a series of digital samples at a rate of 8000 samples per second. Each sample is seven or eight bits in length. As the signals for a telephone call move around the central office, or between central offices, they are transmitted in digital form. Thus, a telephone call consumes a transmission bandwidth of either 56 or 64 kilobits per second. The theoretical (Nyquist) limit for the frequency response of a signal sampled 8000 times per second is 4kHz. However, due to various losses in the telephone system, the frequency response of an ordinary telephone call is usually quoted as 3.1kHz. Ordinary modem-based data transmission uses schemes for encoding data in an analog signal so it fits in this 3.1kHz bandwidth. 14.4kbps is a commonly available transmission rate at the high end of the scale. With this transmission rate, over three-quarters of the bitrate handled by the central office is wasted. Notice that in telephony, 64kpbs means 64000 bits per second, whereas in computer engineering 64k bytes typically means 65536 bytes. ISDN brings the digital signal all the way to your home or desktop. With ISDN, you can place a data call which uses all 56kbps or 64kbps, because there is no need to convert the signal to analog in your modem and back to digital at the central office. The availability of the full bandwidth presents some interesting technological opportunities: -- transmission of high-fidelity compressed audio -- transmission of encrypted audio -- transmission of lots of data -- transmission of other compressed signals, such as video Basic-rate ISDN (BRI) offers two channels of this service. In BRI, the connection between your site and the central office offers 64kbps bidirectionally on each channel. Each of these channels may be used for a voice call, for circuit-switched data, or for X.25 packet switched data. Thus, the existing POTS circuit can be conditioned to carry two calls at the same time. (Your mileage may vary; you have to specifically order and pay for the various services from your telephone company, just as you have to order and pay for Call Waiting for an ordinary phone line. Also, not all services are available everywhere; X.25 connectivity between COs is a notable problem in the Greater Boston area as of 9/93, for example.) Incidentally, ISDN brings another interesting service to your home or desktop: a highly reliable 8000Hz clock signal. In most cases, the central office switches, long-distance carriers, and ISDN terminal equipment all operate with exactly the same clock frequency. In a real-time communications environment (like a voice phone call) this means that there's no need to compensate for differences between the sampling rates at each end of the call. One of the other features it that instead of the CO sending an AC ring signal to activate your bell, it sends a digital package that tells WHO is calling (if available), WHAT TYPE of call (speech, datacomm?), the NUMBER DIALED (maybe one of your aliases) and some other stuff. Your equipment can then analyze this stuff and make an "intelligent" decision what to do with it. For example, a phone (with speech-only capacity) would completely ignore a datacomm call while a Terminal Adapter (ISDN "modem") or a phone with built-in datacom functions would respond to it. If you have several "aliases" tied to your line, you can program certain phones to answer calls for certain numbers only. Datacomm calls contain baud rate and protocol information within the setup signal so that the connection is virtually instantaneous (no messing around with trying different carriers until both ends match). curt@kcwc.com (Curt Welch) etxorst@eos.ericsson.se (Torsten Lif) oj@world.std.com (Oliver Jones) Helge.Oldach@Stollmann.DE (Helge Oldach) --- 8) What do ISDN phones cost? The ISDN sets can cost between $180 for an AT&T 8503T ISDN phone from Pacific Bell up to $1900 depending on what/how many features are needed. A recent report states that the price is $536.90 for an AT&T 7506 with the RS-232 port on the back and $102.70 to get the 507A adaptor to hook analog devices to my 7506. Recent quotes were "$200" for a Coretelco 1800 and "$600" for a Fujitsu SRS 1050. keyman@doorway.Eng.Sun.COM (Dave Evans) huntting@futureworld.advtech.uswest.com (Brad Huntting) spike@coke.std.com (Joe Ilacqua) scotty@l5next.gagetalker.com (Scott Turner) --- 9) Can you use existing telephone equipment with the voice portion? Terminal Adapters (TA'a) are available that will interface non ISDN terminal equipment (TE), called TE2 to the S/T interface. At least one RBOC provides a modem pool to allow for interchange of data with POTS subscribers. Bellcore may approve a standard to allow a analog pair to interface to POTS sets from a NT1. Also w/o a NT2 only one set can be connected to a B channel at a time. This prevents 2 sets from participating in the same voice call. pturner@eng.auburn.edu ( Patton M. Turner) spike@coke.std.com (Joe Ilacqua) --- 10) What is National ISDN? Because of the breadth of the international ISDN standards, there are a number of implementation choices that vendors of ISDN equipment can make. Given the number of choices vendors can make, different vendors equipment may not interoperate. In the United States, Bellcore has released a series of specifications to try to avoid these interoperability problems. These are the National ISDN specifications. Contact the Bellcore ISDN hot line listed below for more information. KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) cherkus@UniMaster.COM (Dave Cherkus) ---- 11) What is the NIUF? North American ISDN Users Forum (NIUF) is an org. of ISDN-interested parties, coordinated by NIST (National Institute of Stds. and Tech.) Contact: NIUF Secretariat National Institute of Standards and Technology Building 223, Room B364 Gaithersberg, MD 20899 (301) 975-2937 voice (301) 926-9675 fax (301) 869-7281 BBS 8N1 2400 bps Bellcore has made the PostScript files for "A Catalog of National ISDN Solutions for Selected NIUF Applications, Second Edition" accessable via anonymous ftp from the machine info.bellcore.com. This document has a tremendous amount of information about ISDN products and vendors, among many other things. See the item below for details. cherkus@UniMaster.COM (Dave Cherkus) ---- 12) What is ATM? ATM (Asynchronous Transfer Mode) is a switching/transmission technique where data is transmitted in small, fixed sized cells (5 byte header, 48 byte payload). The cells lend themselves both to the time-division- multiplexing characteristics of the transmission media, and the packet switching characteristics desired of data networks. At each switching node, the ATM header identifies a "virtual path" or "virtual circuit" that the cell contains data for, enabling the switch to forward the cell to the correct next-hop trunk. The "virtual path" is set up through the involved switches when two endpoints wish to communicate. This type of switching can be implemented in hardware, almost essential when trunk speed range from 45Mb/s to 1Gb/s. One use of ATM is to serve as the core technology for a new set of ISDN offerings known as Broadband ISDN (B-ISDN). For more information, read comp.dcom.cell-relay. This group has a Frequently Asked Questions list; it is posted to news.answers and is in various archives as cell-relay-faq. art@acc.com (Art Berggreen) cherkus@UniMaster.COM (Dave Cherkus) -------- 13) What is B-ISDN? Broadband ISDN refers to services that require channel rates greater than a single primary rate channel. While this does not specificially imply any particular technology, ATM will be used as the switching infrastructure for B-ISDN services. B-ISDN services are categorized as: INTERACTIVE Conversational -- such as videotelephony, videoconferencing, ... Messaging -- such as electronic mail for images, video, graphics,... Retrieval -- such as teleshopping, news retrieval, remote education,... DISTRIBUTION Without user presentation control -- electronic newspaper, electronic newspaper, TV distribution With user presentation control -- remote education, teleadvertising, news retrieval More information: ITU TSS Rec. I.211. KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) -------- 14) What is BONDING? An inverse multiplexing method of the Bandwidth ON Demand INteroperability Group, implemented by most (all?) inverse multiplexor vendors to interoperate with inverse multiplexors of other vendors. BONDING is a set of protocols developed by U.S. inverse multiplexor that supports communication over a set of separate channels as if their bandwidth were combined into a single coherent channel. For example it supports a single 384 kb/s data stream over 6 64 kb/s channels. The specification defines a way of calculating relative delay between multiple network channels and ordering data such that what goes in one end comes out the other. Most (all?) vendors also have their own proprietary methods that usually add features functions not present in BONDING mode 1. Mode 1 is the mode used for recent interoperability testing between vendors. Chip Sharp at Teleos has made available electronic copies of the BONDING (Bandwidth on Demand Interoperability Group) 1.0 and 1.1 specifications. The specs are available via WWW, gopher, anonymous FTP, DECnet COPY, and AFS (see instructions below). The following files are available: - aaareadme-networks help file (in ascii text) - bdmain.doc main body of BONDING 1.0 specification (Word for Windows 2.0 format) - bdmain.ps main body of BONDING 1.0 specification (Postscript) - bdannex.doc annex of BONDING 1.0 specification (Word for Windows 2.0 format) - bdannex.ps annex of BONDING 1.0 specification (Postscript) - bd_v1_1.doc changes for BONDING 1.1 specification (Word for Windows 2.0 format) - bd_v1_1.ps changes for BONDING 1.1 specification (Postscript) Transfer Instructions: WWW: server: www.hep.net URL: gopher://www.hep.net:70/11/info_center/networks/bonding Gopher: server: gopher.hep.net Bookmark: Name=Bandwidth on Demand Interoperability Group (BONDING) Documents Type=1 Port=70 Path=1/info_center/networks/bonding Host=gopher.hep.net Anonymous FTP: server: ftp.hep.net directory: networks/bonding DECnet COPY (only for those on HEP-NSI DECnet): HEPNET::[ANON_FTP.NETWORKS.BONDING] AFS: /afs/hepafs1.hep.net/public/anon_ftp/networks/bonding marc@dumbcat.sf.ca.us (Marco S Hyman) "Bob Larribeau" "David E. Martin" --- 15) Data Encapsulation for IP over ISDN A decision was made at the Amsterdam IETF to state that all systems wishing to guarantee IP interoperability should implement PPP. Such systems may also implement the Frame Relay or X.25 encapsulations, and an RFC will be published delineating how, when it is known that the encapsulations are limited to that set of three, they may be distinguished by examination of the first correctly checksumed and HDLC bit-stuffed packet. There is an Internet Draft from the Point-to-Point Protocol Working Group of the Internet Engineering Task Force that describes the use of PPP over ISDN. This draft is named draft-ietf-pppext-isdn-NN.txt in the internet-drafts Shadow Directories on nic.ddn.mil, nnsc.nsf.net, nic.nordu.net, ftp.nisc.sri.com, munnari.oz.au, Germany.EU.net and on many, many other mirror archives. This is also discussed in RFC 1356 by Malis, et. al. The de facto standard in most European countries is an encapsulation using simple HDLC in layer 1, X.75 (LAPB, usually I-frames) in layer 2 and, sometimes, T.70 in layer 3. X.75 happens to be a bit more crispy especially using short hold mode and it is simpler. PPP has to be used instead when the network doesn't provide the callers telephone number eg. when emulating a modem or the callers number is lost on telephone company borders. In this case, caller authentication has to be done via PAP/CHAP instead. sklower@toe.CS.Berkeley.EDU (Keith Sklower) cherkus@UniMaster.COM (Dave Cherkus) KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) muftix@junior.bintec.de (Juergen Ernst Guenther) -------- 16) Full Motion Video over ISDN In ISDN, video isn't a "service being offered" - at least not for low/midrange quality. You buy the proper equipment for both subscribers, plug it in, and place the call. Just like speaking French on ISDN isn't something being offered - it is something you just do, yourself. Video telephony over narrowband ISDN is governed by a suite of TSS (formerly CCITT) interoperability standards. The overall video telephony suite is known informally as p * 64, and formally as standard H.320. H.320 is an "umbrella" standard; it specifies H.261 for video compression, H.221, H.230, and H.242 for communications, control, and indication, G.711, G.722, and G.728 for audio signals, and several others for specialized purposes. A common misconception, exploited by some equipment manufacturers, is that compliance with H.261 (the video compression standard) is enough to guarantee interoperability. Bandwidth can be divided up among video, voice, and data in a bewildering variety of ways. Typically, 56kbps might be allocated to voice, with 1.6kbps to signalling (control and indication signals) and the balance allocated to video. An H.320-compatible terminal can support audio and video in one B channel using G.728 audio at 16 kb/s. For a 64 kb/s channel, this leaves 46.4 kb/s for video (after subtracting 1.6 kb/s for H.221 framing). The resolution of a H.261 video image is either 352x288 (known as CIF) or 176x144 (known as quarter-CIF or QCIF). The frame rate can be anything from 30 frames/second and down. Configurations typically use a 2B (BRI) or a 6B (switched-384 or 3xBRI with an inverse multiplexer) service, depending on the desired cost and video quality. In a 384kbps call, a video conferencing system can achieve 30 frames/second at CIF, and looks comparable to a VHS videotape picture. In a 2B BRI call, a standard video phone can achieve 15 frames/second at CIF. Those who have seen the 1B video call in operation generally agree that the quality is not sufficient for anything useful like computer based training - only for the social aspect of being able to *see* Grandma as well as hear her (sort of like the snapshot pictures you make with that $5 camera with no controls). A 2B picture, on the other hand, is for all practical purposes sufficient for remote education, presentations etc. Rapidly changing scenes are still not very well handled, but as soon as the picture calms down, the sharpness and color quality are impressive (considering that only two plain phone channels are being used). With 2B+D being the standard BRI, this kind of picturephone will be usable "everywhere" (including private homes). However, it should still be noted that 6xB or H0 does allow for dramatic improvement in picture quality compared to 2xB. In particular, H.320 video/audio applications will often allocate 56kbps for audio, leaving only 68.8kbps for video when using 2xB. On the other hand, using H0 would get you 326.4kbps for video with 56kbps for audio. Alternative audio algorithms can improve picture quality over 2xB by not stealing as many bits. Note that 6B is not identical to H0; the latter is a single channel which will give you 80kbps above that of six separate B channels. Inverse multiplexors can be used to combine B channels. ketil@edb.tih.no (Ketil Albertsen,TIH) kevin@newshost.pictel.com (Kevin Davis) oj@world.std.com (Oliver Jones) mikes2@cc.bellcore.com (Mike Souryal) --- 17) How do I find out about getting ISDN in my area? EURIE contact data: Country Company name tel / fax =========== ================ ====================== =================== Austria PTT Austria Mr Michael Schneider +43 1 317 30 39 +43 1 31 3.13.66.63 Belgium BELGACOM Mr Egied Dekoster +32 2/213.46.49 +32 2/921.02.13 Denmark Tele Danmark Mr Soren Christensen +45 3399 6940 +45 3314 5625 Finland Telecom Finland Mr Terho Salo +358 31 243 22 67 +358 31 243 23 83 Finland The ATC Finland Mr Matti Tammisalo +358 0 606 35 08 +358 0 606 33 22 France France Telecom Mr Pascal Meriaux +331 44 44 53 59 +331 44 44 75 50 Germany DBP Telekom Mr Volker Fink +49 6151 83 30 67 +49 6151 83 50 68 Greece OTE Mrs Vas. Danelli +30 1 611 89 96 +30 1 805 20 64 Ireland Telecom Eireann Mr John Lawler +353 1 790 10 00 +353 1 677 49 41 Italy Iritel Mr Rocco Gentile +39 65 494 52 56 +39 65 94 20 54 Italy Itacable Mr Rolando Bottoni +39 65 734 45 23 +39 65 7 34 48 05 Italy SIP Mr Bernardino de Rito +39 6 36 88 40 38 +39 6 36 44 88 Luxembourg EPTL Mr Hubert Schumacher +352 49 91 56 56 +352 49 12 21 Netherlands PTT Telecom Ms Corinne der Kinderen +31 70 34 32 473 +31 70 34 39 747 Norway Norwegian Telecom Mr Odd Egil Asen +47 22 77 71 22 +47 22 2 0 78 00 Portugal TLP Mr Antero Aguilar +351 1 147 797 +351 1 544 796 Portugal Telecom Portugal Mr Jose Brito +351 1 35 04 710 +351 1 35 04 197 Spain Telefonica Espana Mr Fernando Moratinos +34 1 584 96 81 +341 584 95 58 Sweden Telia Mr Peter Ostergren +46 8 713 17 99 +46 8 713 73 62 Switzerland PTT Telecom Mr Jean-Yves Guillet +41 31 62 72 27 +41 31 6 2 85 26 UK British Telecom Mr JM Pickard +44 71 356 89 52 +44 71 796 91 20 UK Mercury Mr Clive Curt is +44 71 528 26 35 +44 71 528 20 66 Australia: Telecom: 008 077 222 (voice), (07) 220 0080 (fax) Belgium: As from 01/01/94 ISDN is available in belgium on demand. All major switching nodes of the national telecom company BELGACOM are digital and a very fast increasing number of sub-nodes are converted to digital connections. BRA (Basic Rate Access) can be connected in less than a week in over 75% of the country. PRA may take longer depending on geographical location. Caller ID is available on ISDN in Belgium (using EURO-ISDN = ISDN fase 2 in Belgium) but only between ISDN devices although it may be hidden by the caller. BELGACOM: departement van de communicatie, ISDN-cel paleizenstraat 42 - 4de verdieping 1210 Brussel tel: 078/11.66.77 (free of charge) Germany: Deutsche Bundespost Telekom IfN - Ingenierubuero fuer Nachrichtentechnik Haidelmoosweg 52 D - 78467 Konstanz Tel: +49 7531 97000-0 FAX: +49 7531 74998 United Kingdom: British Telecom ISDN Helpdesk 0800 181514 from within the UK, +44 272 217764 from outside. Mercury Data Communication 0500 424194 from within the UK, +44 81 914 2335 from outside. North America: North American ISDN Users Forum (NIUF): see item above United States: I suggest that you call the local telephone service center office and ask for the name and number of the Marketing Product Manager for ISDN services. If the service rep cannot make heads or tails of your question, ask to speak to the local service center manager for complex business services. This person should be able to direct you to the right place. For the Bell companies, this position is normally part of the telephone company's core marketing staff at their headquarters location. Ameritech: 800-832-6328 Bellcore national ISDN information clearing house hotline: 800 992-4736 Bellcore's "ISDN Deployment Data", Special Report (SR) 2102. Bellcore document ordering: US: 1-800-521-2673, other: 1-908-699-5800 Bell Atlantic: 800-570-ISDN (all except New Jersey Bell) 1-800-843-2255 x4736 (New Jersey Bell customers) BellSouth 1-800-858-9413 Cincinatti Bell 513-566-DATA You can call Pacific Bell at [800] 995-0346. This is an extensive menu-driven system (yuck) that allows Pac Bell customers to enter their area code and prefix to find out what services are available. It doesn't tell you which switch, though. Pac Bell also operates a Gopher server at gopher.pacbell.com or gw.pacbell.com. The Pac Bell ISDN service center is at 1-800-4PB-ISDN. GTE: Menu-driven information service at [800] 4GTE-SW5. Florida, North Carolina, Virginia, and Kentucky: 1-800-483-5200 Illinois, Indiana, Ohio, and Penn. 1-800-483-5600 Oregon and Washington 1-800-483-5100 California 1-800-483-5000 Hawaii 1-800-643-4411 Texas 1-800-483-5400 Nevada Bell 702-688-7124 (contact Lyle Walters) NYNEX: 1-800-438-4736, 800-GET-ISDN, 800-698-0817 or 212-626-7297. Rochester Tele. 716-777-1234 Southwestern Bell (Texas) Austin 512-870-4064 Dallas 214-268-1403 Houston 713-638-7000 San Antonio 512-351-8050 US West 303-896-8370 (contact Julia Evans) Combinet "BBS": By popular demand, the Combinet "BBS" providing information on ISDN availability in many areas of the US is now available via the Internet. The information is supplied by Bell Communications Research and various Operating Companies and is updated periodically as new information becomes available. To access the service, telnet to bbs.combinet.com and login as isdn (no password is required). After entering an area code and three-digit prefix, the service displays the availability of ISDN. Also displayed is information about carrier installation prices and monthly charges. For those without direct Internet access, the service continues to be available on a dialup basis using a 2400 bit/sec modem at (408) 733-4312. Intel: If you want to know if you can get basic rate ISDN in YOUR LOCAL AREA (anywhere in the U.S>), call the helpful folks at Intel on 1-800-538-3373, and ask for extension 208. They have lots of good FREE info on ISDN availability, pricing, etc. bharrell@garfield.catt.ncsu.edu (Ben Harrell) elitman@wam.umd.edu (Eric A. Litman) marc@Synergytics.COM (Marc Evans) varney@ihlpf.att.com (Al Varney) bernot@inf-wiss.uni-konstanz.de (Gerhard Bernot) jhonan@kralizec.zeta.org.au (Jamie Honan) dav@genisco.gtc.com (David L. Markowitz) Peter Ilieve p00210@psilink.com (Gerald L. Hopkins) KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) fenton@combinet.com (Jim Fenton) james@kaiwan.com (James - The Keeper) stamp@cc.bellcore.com (stamp,scott) we34329@is1.vub.ac.be (Sven De Kerpel) --- 18) Where can I find what all of these acronyms mean? An archive of telecommunication related files are maintained on lcs.mit.edu in the telecom-archives sub directory. There is a glossary of general telecom acronyms, as well as an ISDN specific list. jms@romana.Tymnet.COM (Joe Smith) asks: PMW1@psuvm.psu.edu (Peter M. Weiss) ---- 19) What are the relevant standards? There are numerous TSS (formerly CCITT) standards on ISDN. References in the book bibliography (especially Stallings and appendix B of Kessler) contain more details. Q.921 (aka I.441) "ISDN User-Network Interface Data Link Layer Specifications", 1988 The D channel protocol. Found in Blue book Fascicle VI.10 Q.931 (aka I.451) "ISDN User-Network Interface Layer 3 Specification for Call control" 1988. The messages that are sent over the D channel to set up calls, disconnect calls etc. Found in Blue book Fascicle VI.11 Q.930: General Overview Q.931: Basic ISDN call control Q.932: Generic procedures for the control of ISDN supplementary services Q.933: Frame Mode Call Control Q.2931 (ex-Q.93B): B-ISDN Call control G.711: Pulse Code Modulation (PCM) of Voice Frequencies G.722: 7-kHz Audio Coding Within 64 kbit/s G.728: Coding of Speech at 16 kbit/s Using Low-Delay Code Excited Linear Prediction (LD-CELP) H.320: Narrow-band Visual Telephone Systems and Terminal Equipment H.221: Frame Structure for a 64 to 1920 kbit/s Channel in Audiovisual Teleservices H.230: Frame Synchronous Control and Indication Signals for Audiovisual Systems H.242: System for Establishing Communications Between Audiovisual Terminals Using Digital Channels up to 2 Mbit/s H.261: Video Codec for Audiovisual Services at p x 64 kbits/s H.243: Basic MCU Procedures for Establishing Communications Between Three or More Audiovisual Terminals Using Digital Channels Up to 2 Mbit/s I.2xy "ISDN Frame Mode Bearer Services", 1990 I.310 ISDN - Network Functional Principles I.320 ISDN protocol reference model I.324 ISDN Network Architecture I.325 Reference configs for ISDN connection types I.326 I.330 ISDN numbering and addressing principles I.331 Numbering plan for ISDN (and several more in I.33x relating to numbering and addressing and routing) I.340 ISDN connection types I.350/351/352 refer to performance objectives I.410-412 refer to user-network interfaces as do I.420 and 421 I.430/430 Layer 1 specs I.440/441 Layer 2 specs (Q.921) I.450-452 Layer 3 specs (Q.931) I.450: General Overview I.451: Basic ISDN call control I.452: Extensions I.460-465 Multiplexing and rate adaption I.470 Relationship of terminal functions to ISDN V.110 (aka I.463) "Support of DTE's with V Series Type Interfaces by an ISDN" Terminal rate adaption by bit stuffing. C.f. V120. V.120 (aka I465) "Support by an ISDN of Data Terminal Equipment with V series Type Interfaces with Provision for Statistical Multiplexing" 1990 (This has been amended since the blue book). An alternative to V.110 V.25bis calling mechanism under synchronous. TSS (formerly CCITT) standards can be obtained via: On line (anonymous ftp): [ Ed Note: People report that these documents are missing tables and figures. Also, these documents are in various formats: ASCII, PostScript and Micrsoft Word 2.0. If anyone has any further comments, let me know ] kum.kaist.ac.kr: /doc/STANDARDS/ccitt src.doc.ic.ac.uk: /pub/computing/ccitt/ccitt-standards/ccitt croton.inria.fr: /ITU/ccitt cs.huji.ac.il: /pub/doc/standards/ccitt ftp.uu.net: /pub/lietrary/obi/Standards/CCITT gatekeeper.dec.com: /pub/net/info/bruno.cs.colorado.edu/pub/standards/ccitt imag.imag.fr:/doc/ccitt metro.ucc.su.oz.au: /pub/ccitt quepasa.cs.tu-berlin.de: /pub/doc/CCITT sh.wide.ad.jp:/CCITT unix.hensa.ac.uk:/pub/uunet/doc/literary/obi/Standards/CCITT world.std.com:/obi/Standards/CCITT Gopher: info.itu.ch E-Mail: Mail to: teledoc@itu.arcom.ch Mail body: HELP LIST ITU LIST ITU /REC Hard Copy: International Telecommunication Union Information Services Department Place des Nations 1211 Geneva 20 Switzerland TEL: +41 22 730 5554 FAX: +41 22 730 5337 Internet email: helpdesk@itu.ch X.400 email: S=helpdesk;A=arcom;P=itu;C=ch cherkus@unimaster.com dave@philips.oz.au oj@vivo.com KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) we34329@is1.vub.ac.be (Sven De Kerpel) --- 20) Who is shipping what? ISDN Products by Vendor: +------------------+--------------------------------------------+ | | Product Type | | Vendor +----+----+----+----+----+----+----+----+----+ | | IF | TA | BR | RO | TE | IC | TS | VC | CC | +------------------+----+----+----+----+----+----+----+----+----+ | AMD | | | | | | x | | | | | AT&T | x | x | | | x | x | x | | | | ANDO | | | | | | | x | | | | Ascend | | | | x | | | | | | | AT&T Microelect. | | | | | | x | | | | | BinTec | x | | | x | | | | | | | Combinet | | | x | | | | | | | | CPV-Stollmann | x | x | x | x | | | | | | | DGM&S | | | | | | | | | x | | diehl isdn | x | | x | | | | | | | | DigiBoard | | | x | | | | | | | | Digital Eq. | x | | | x | | | | | | | Gandalf | x | x | | | | | | | | | Hayes | x | x | | | | | | | | | IBM | x | | | | | | | | | | ISDN Systems | x | | | | | | | | | | Motorola UDS | | x | | | | | | | | | MITEL | | | | | | | x | | | | netCS | x | | | x | | | | | | | Network Express | | | x | x | | | | | | | Paxdata | | x | x | | | | | | | | Siemens | | | | | | x | | | | | Spider Systems | | | | x | | | | | | | Sun Microsystems | x | | | | | | | | | | Telenetworks | | | | | | | | | x | | Teleos | | | | | | | x | | | | Telesoft | | | | | | | x | | x | | Telrad Telecomm. | | | | | | | x | | | | Trillium | | | | | | | | | x | | Zydacron | | | | | | | | x | | +------------------+----+----+----+----+----+----+----+----+----+ Key: IF: Interface Card TA: Terminal Adapter (Standalone) BR: Bridge RO: Router TE: Telephones IC: Integrated Circuit TS: Test Equipment VC: Video Teleconferencing Equipment CC: Call Control Software Vendor Info: Advanced Micro Devices 901 Thomson place Mailstop 126 Sunnyvale, CA 94086 (408) 732 2400 (voice) American Telephone and Telegraph 1-800-222-PART: Quick access to small quanity orders of ISDN products. Personal Desktop Video or TeleMedia Connection System: Visual Communications Products 8100 East Maplewood Avenue 1st Floor Englewood, CO 80111 (800)843-3646 (800)VIDEO-GO Prompt 3 ANDO: 7617 Standish Place Rockville, MD 20855 voice: (301) 294-3365 fax: (301) 294-3359 email: mgriffin@access.digex.net Ascend Communications, Inc. 1275 Harbor Bay Pkwy Alameda, CA 94501 (510) 769-6001 info@ascend.com AT&T Microelectronics Allentown, PA (800) 372-2447 Distributer: CoSystems at 408.748.2190 mktg: Steve Martinez at 408.748.2194 (steve@cosystems.com) tech: Gary Martin at 408.748.2195 (gary@cosystems.com) BinTec Computersysteme GmbH Willstaetter Str. 30 D-90449 Nuernberg Germany Phone: +49.911.9673-0 Fax: +49.911.6880725 email: vertrieb@bintec.de Combinet 333 West El Camino Real, Suite 240 Sunnyvale, California 94087 (408) 522 9020 (voice) (408) 732 5479 (fax) CPV-Stollmann Vertriebs GmbH Gasstrasse 18 P.O. Box 50 14 03 D-22761 Hamburg D-22714 Hamburg Germany Germany Phone: +49-40-890 88-0 Fax: +49-40-890 88-444 Electronic Mail: Info@Stollmann.DE (general inquiries) Helge.Oldach@Stollmann.DE (IPX router technical contact) Michael.Gruen@Stollmann.DE (IP router technical contact) DGM&S 609.866.1212 diehl isdn GmbH Bahnhofstrasse 63 D-7250 Leonberg Germany Tel. 49/7152/93 29 0 Fax. 49/7152/93 29 99 email: bode@diehl.de DigiBoard 6400 Flying Cloud Drive Eden Prarie, MN 55344 (612) 943 9020 (voice) (612) 643 5398 (fax) info@digibd.com (email) Digital Equipment Co REO2 G/H2 DEC Park Worton Grange Reading Berkshire England Gandalf Cherry Hill Industrial Center Building 9 Cherry Hill, NJ 08002 (800) GANDALF (voice) Hayes ISDN Technologies 501 Second St., Suite 300 San Francisco CA 94107 (415) 974-5544 (voice) (415) 543-5810 (fax) ISDN Product Manager: Chris Brock (cbrock@hayes.com) International Business Machines (800) 426-2255 ISDN Systems Corp. Vienna VA USA 703-883-0933 MITEL Corporation 360 Legget Drive Kanata, Ontario, Canada K2K 1X3 Paul Mannone or Peter Merriman (613) 592-2122 Motorola UDS 5000 Bradford Drive Huntsville, AL 35805 (205) 430 8000 (voice) netCS Informationstechnik GmbH Feuerbachstr. 47-49 12163 Berlin 41 Germany Tele: +49.30/856 999-0 FAX: +49.30/855 52 18 E-Mail: sales@netcs.com / support@netcs.com Network Express Andrew Hasley Jim Hietala (West Region) Randy Sisto (East Region) VP, Sales hietala@netcom.com randys@access.digex.net 4251 Plymouth Road 342 Lester Ct. 11566 Ivy Bush Court Ann Arbor, MI 48105 Santa Clara, CA 95051 Reston, Virginia 22091 (313) 761-5005 (voice) Tel. 408-241-5165 Phone: (703) 264-5095 (313) 995-1114 (fax) Fax. 408-241-6246 Fax: (703) 264-5176 Network Express Incorporated (info@nei.com) Andy Hasley, VP Sales (hasley@nei.com) Randy Sisto, Product Manager Jim Hietala,Western Regional Manager 4251 Plymouth Road 342 Lester Court Ann Arbor, MI 48105 Santa Clara, CA 95051 phone (313) 761-5005 phone (408) 241-5165 fax (313) 995-1114 fax (408) 241-6246 randys@nei.com hietala@netcom.com Paxdata Networks Limited Communications House Frogmore Road Hemel Hempstead HERTS HP3 9RW UK 0442 236336 (voice) 0442 236343 (fax) mktg: Jim Fitzpatrick (jim@paxdata.demon.co.uk) tech: Giles Heron (giles@paxdata.demon.co.uk) Siemens Components Inc. Integrated Circuit Division 2191 Laurelwood Road Santa Clara, CA 95054-1514 (408) 980-4500 Spider Systems UK France Germany Spider Systems Limited Spider Systems SA Spider Systems Limited Spider House Les Algorithmes Schadowstrasse 52 Peach Street Saint Aubin 91194 D-4000 Dusseldorf 1 Wokingham Gif-sur-Yvette Germany England Paris Cedex RG11 1XH France 0734 771055 (voice) (1) 69 41 11 36 (voice) (0211) 93 50 120 (voice) 0734 771214 (fax) (1) 69 41 12 27 (voice) (0211) 93 50 150 (fax) Sun Microsystems Computer Company (SMCC) Mountain View, CA (800) USA-4SUN Telenetworks Lauren May Tel: 707.778.8737 Fax: 707.778.7476 tn@well.sf.ca.us Teleos 2 Meridian Road Eatontown, NJ 07724 908.389.5700 Telesoft Chris Cox 512.282.6701 Telrad Telecommunications, Inc. 135 Crossways Park Drive Woodbury, New York 11797 (516) 921-8300 1 800 645-1350 Trillium 310.479.0500 Zydacron, Inc. 670 Commercial Street Manchester, NH 03101 Tel: (603) 647-1000 Fax: (603) 647-9470 Many of the references, including Kessler, provide information on ISDN equipment. kenow@stpaul.ncr.com (TONY KENOW) garym@netcom.com (Gary Martin) bob_clemmons@smtp.esl.com (Bob Clemmons) marc@dumbcat.sf.ca.us (Marco S Hyman) dav@genisco.gtc.com (David L. Markowitz) bear@holly.ho.att.com (James J Allen +1 908 834 1713) giles@paxdata.demon.co.uk (Giles Heron) --- 21) How about that SPARCstation 10? The hardware on the SS10 supports 2 B channels (64K+64K) and 1 D channel (16K) for a grand total 144K in marketing speak. Typically you might use both B channels for data, 1 channel for voice and 1 channel for data, or 1 channel for data to 1 point and 1 channel for data to another point. In some parts of the world it's also popular to run X.25 over the D channel. Info from the SPARCstation 10 full announcement e-mail: - What Becomes Available When: o ISDN Chip on the motherboard (done) ISDN Drivers on Solaris 2.1 or greater (done) Teleservices API Q1 CY93 Solaris 2.x Wide Area Networking software Q1 CY93 Solaris 2.x The chip on the motherboard provides a BRI (basic rate interface) ISDN connection that is integrated with workstation audio. The drivers provide a low level interface to the hardware. The Teleservices API enables application development for workstation/telephony integration - providing functions like call setup, transfer, hold, confer, etc. The API is hardware independent so that it will work with third party non-ISDN telephony hardware and software. The WAN software enables data communication - running IP over ISDN (in other words, applications that run over ethernet will run over ISDN). In the first release, Sun will support data communications in the US (for the AT&T 5ESS switch), the UK, France, Germany and Japan. We will support voice services in the US (for the AT&T 5ESS switch) only. This is also now available on the SPARCstation LX, and available as an SBus card for any SBus workstation running Solaris 2.1 or later. The current set of ISDN drivers for Solaris 2.1 or greater support the AT&T 5ESS switch; the next release is expected to support DMS-100 and national standard. Get API_xtel* from sunsite.unc.edu:/pub/sun-info/white-papers for more information on the API itself. The XTel libraries, etc., are not bundled with either Solaris 2.x or SunLink ISDN at this time. SunLink ISDN description (quoted from Fall/Winter '93 SunExpress catalog): The SunLink ISDN software included in both kits is based on the international CCITT standard, and supports the following carrier-dependent implementations: o AT&T 5ESS (U.S.) o France Telecom VN2 (France) o DBT 1TR6 (Germany) o Britsh Telecom ISDN2 (U.K.) o NTT INS-Net 64 (Japan) Sunlink ISDN software provides the following features: o Transparent IP connectivity, to allow you to run most existing IP applications, without modification, over ISDN o Graphics User Interface (GUI)-based configuration tool, for easy installation and administration o Security features, including callback, calling address, and PPP authentication password o Inactivity timer, for transparent open/close connections o Integrated network management with SunNetManager agent dank@blacks.jpl.nasa.gov (Dan Kegel) kessler@Eng.Sun.COM (Tom Kessler) Greg.Onufer@Eng.Sun.COM dav@genisco.gtc.com (David L. Markowitz) --- 22) How about that IBM Waverunner? The IBM WaveRunner Digital Modem is an internal adapter for personal computers (ISA or Microchannel) which can communicate over an ISDN line to either ISDN destinations or analog modems and FAX machines. WaveRunner requires ISDN Basic Rate service, an NT-1, and either OS/2 2.1 or higher or Microsoft Windows 3.1 or higher. WaveRunner uses AT-style commands, can be used with existing communication application, supports V.120 encapsulation and performs TCP/IP SLIP to Synchronous TCP/IP Translation. The WaveRunner Hot Line at 1-919-254-ISDN is available for questions Technical Support. For a product brochure, call 1-800-426-3395 and request document 13403. To order, call 1-800-IBM-2YOU (1-800-426-2968) A complete description is available via anonymous ftp: ibminet.awdpa.ibm.com: pub/announcements/193-305 jordan@hursley.ibm.com (Rob Jordan) lmarks@vnet.IBM.COM (Laurence V. Marks) --- 23) What is a SPID? How come my ISDN device won't work without one? SPIDs are Service Profiles IDs. SPIDs are used to identify what sort of services and features the switch provides to the ISDN device. Currently they are used only for SAPI 0 (circuit-switched) service. Annex A to ITU recommendation Q.932 specifies the (optional) procedures for SPIDs. They are most commonly implemented by ISDN equipment used in North America. When a new subscriber is added, the telco personnel allocate a SPID just as they allocate a directory number. In many cases, the SPID number is identical to the (full ten digit) directory number. In other cases it may be the directory number concatinated with various other strings of digits, such as digits 0100 or 0010, 1 or 2 (indicating the first or second B channel on a non-centrex line), or 100 or 200 (same idea but on a centrex line) or some other, seemingly arbitrary string. Some people report SPIDs of the form 01nnnnnnn0 for AT&T custom and 01nnnnnnn011 for NI-1, where n is the seven digit directory number. It is all quite implementation dependent. When the subscriber plugs in a properly configured device to the line, Layer 2 initialization (TEI assignment) takes place, establishing the transport mechanism. However if the subscriber has not configured the given SPID into their ISDN device, the device should not perform layer 3 initialization and the subscriber will not be able to make calls. This is, unfortunately, how many subscribers discover they need a SPID. Once the SPID is configured, the terminals go through an initialization/identification state which has the terminal send the SPID to the network in a Layer 3 INFOrmation message whereby the network responds with an INFO message with the EID information element (ie). Thereafter the SPID is not sent again to the switch. The switch may send the EID or the Called Party Number (CdPN) in the SETUP message to the terminal for the purpose of terminal selection. SPIDs should not be confused with TEIs (terminal endpoint identifiers). TEIs identify the terminal at Layer 2 for a particular interface (line). TEIs will be unique on an interface, whereas SPIDs will be unique on the whole switch and tend to be derived from the primary directory number of the subscriber. Although they are used at different layers, they have a 1-to-1 correspondence so mixing them up isn't too dangerous. TEIs are dynamic (different each time the terminal is plugged into the switch) but SPIDS are not. Following the initialization sequence mentioned above the 1-to-1 correspondence is established. TEIs are usually not visible to the ISDN user so they are not as well known as SPIDs. The "address" of the layer 3 message is usually considered to be the Call Reference Value (also dynamic but this time on a per call basis) as opposed to the SPID, so the management entity in the ISDN device's software must associate EID/CdPN on a particular TEI and Call Reference Number to a SPID. There are some standards that call for a default Service Profile, where a terminal doesn't need to provide a SPID to become active. Without the SPID however, the switch has no way of knowing which terminal is which on the interface so for multiple terminals an incoming call would be offered to the first terminal that responded, rather than to a specific terminal. sorflet@bnr.ca (winston (w.l.) sorfleet) cstorry@gandalf.ca (Chuck Storry) --- 24) Will ISDN terminal equipment that works in one country work properly when it is installed in another country? There are three major problem areas. The first has to do with voice encoding, and is only a problem if the equipment is a telephone. Equipment designed for use in North America and Japan uses mu-law encoding when converting from analog to digital, whereas the rest of the world uses A-law. If the equipment can be switched, then there will not be a problem with the voice encoding. The second has to do with the way the equipment communicates with the telephone exchange. There are interoperability problems because there are so many different services (and related parameters) that the user can request and because each country can decide whether or not to allow the telephone echange to offer a given service and because the specifications that describe the services are open to interpretation in many different ways. So, as with other interoperability problems, you must work with the vendors to determine if the equipment will interoperate. This is a basic problem; it impacts all ISDN equipment, not just voice equipment. The third has to do with homologation, or regulatory approval. In most countries in the world the manufacturer of telephone equipment must obtain approvals before the equipment may be connected to the network. So, even if the equpipment works with the network in a particular country, it isn't OK to hook it up until the manufacturer has jumped through the various hoops to demonstrate safety and compliance. It is typically more expensive to obtain world-wide homologation approvals for a newly-developed piece of ISDN equipment than it is to develop it and tool up to manufacture it. There are attempts to remidy this situation, particularly for BRI ISDN. In North America, the National ISDN User's Forum is coming up with standards that increase the uniformity of ISDN services. In Europe, a new standard called NET3 is being developed. msun@ntmtv.com (Ming Sun) marc@dumbcat.sf.ca.us (Marco S Hyman) jwb@capek.rdt.monash.edu.au (Jim Breen) keyman@Eng.Sun.COM (Dave Evans) oj@world.std.com (Oliver Jones) wmartin@nsa.bt.co.uk (William Martin) -------- 25) Will ISDN terminal equipment that works with one vendor's ISDN switch work properly when it is used with another vendor's switch? [Ed. Note: The title is edited from the previous faq to try to fit in with the preceding question] [Also, this seems to imply that there are only two implementations to worry about and it is very US-centric. This section needs to be reworked] Before National ISDN-1 is implemented, the ATT 5ESS switches and Northern Telecom DMS100 switches speak different call setup dialogues. That's why you will see ISDN TE listed as 5ESS, DMS100 or both. Jim.Rees@umich.edu (Jim Rees) jerry@watchman.sfc.sony.com (Jerry Scharf) -------- 26) Do different manufacturers Terminal Adaptors interoperate when used asynchronously? There is a standard up to 19.2k (V.110) but above that there is no real standard implemented. However, in practice there is a fair degree of interoperability (even when the TA's manual tells you otherwise) because many TAs use the same chip set (supplied by Siemens) which happily goes up to 38.4. TAs from different suppliers that are using the Siemens chips have a fair chance of interoperating at up to 38.4k. wmartin@nsa.bt.co.uk (William Martin) -------- 27) Why do I get only about 19.2k throughput from my TA? The problems in using TA's are the same as those in using fast modems. You only get the throughput that your serial port can handle. The serial ports of many machines struggle to receive at 19.2k. Sending seems to be easier. Many machines that will happily chuck data at a TA at 38.4, but choke down to around 19.2k or l ower when receiving (with lots of retries on ZMODEM file transfer). wmartin@nsa.bt.co.uk (William Martin) -------- 28) How long should call setup take when using a TA? The "less than a second" call setup sometimes claimed seems to be rare. TAs have a negotiation phase and it typically takes around 4 seconds to get through to the remote site. wmartin@nsa.bt.co.uk (William Martin) -------- 29) Can I get on-line National ISDN information from Bellcore? Information about National ISDN is now available by anonymous FTP (File Transfer Protocol) over the Internet at host "info.bellcore.com". FTP allows the retrieval of formatted documents and software. The rest of this document assumes that you have access to a machine connected to the Internet that supports FTP, and that you have a system that can print both ASCII formatted documents and PostScript formatted documents. The files are available in PostScript through anonymous FTP from "info.bellcore.com" in the /pub/ISDN sub directory. I M P O R T A N T: Many of the files are large, it is essential that you first get the README (the upper case is important) file for detailed information on retrieving various files associated with documents. The following text describes a typical anonymous FTP session: system: ftp info.bellcore.com Connected to info.bellcore.com. 220 info FTP server (SunOS 4.1) ready. Name: anonymous 331 Guest login ok, send ident as password. Password: 230 Guest login ok, access restrictions apply. ftp> cd /pub/ISDN 250 CWD command successful. ftp> mget README mget README? yes 200 PORT command successful. 150 ASCII data connection for README (8758 bytes). 226 ASCII Transfer complete. local: README remote: README 8943 bytes received in 0.19 seconds (46 Kbytes/s) ftp> quit 221 Goodbye. represents pressing the "enter" or "return" key on your computer keyboard. The README file is in ASCII format and may be read with most word processors. The other files in the directory are in PostScript format and may be downloaded as needed by using the "mget" command while in the FTP. You should determine your local procedure for printing PostScript documents. For example, on many UNIX systems, PostScript files may be printed on a PostScript printer by using the "lpr" command. A typical Post Script print command may look like: lpr -P -h -v where: represents printer name accessable to your system, and represents a PostScript file. notes: '-h' corresponds to the option of suppressing the printing of burst page while '-v' corresponds to the option of printing raster image, i.e., PostScript. Please note that the printer must support PostScript imaging model in order to print these files. Some systems are configured to detect PostScript formatted files automatically, so a command to print the documents on that kind of system is: lpr -P If you have problems or you'd like to comment on the information stored at this site or wish to make recommendations for future enhancements, you can send email to: isdn@cc.bellcore.com Or, call the Bellcore's National ISDN Hotline: 1-800-992-ISDN A recent visit to the system revealed the following directories: CATALOG: NIUF (National ISDN User's Forum) catalog: "A Catalog of National ISDN Solutions for Selected NIUF Applications, Second Edition." [Ed: lots of big files, but some great info - chapter 4 is hundreds of pages of ISDN product/vendor information] CONTACTS: List of ISDN contacts at various Regional Bell Operating Companies DEPLOYMENT: Currently empty but being worked on EVENTS: Info about the "ISDN Solutions '94" event NATIONAL_ISDN: Bellcore document SR-NWT-2006, "National ISDN" [Ed: I couldn't get this to print - what about you?] README: The Read Me File TARIFF: Currently empty but being worked on whs70@cc.bellcore.com (sohl,william h) -------- 30) Where can I read more? "ISDN In Perspective" Fred R. Goldstein Addison-Wesley ISBN 0-201-50016-7 [Ed. Note: the second edition is new...] "ISDN: Concepts, Facilities, and Services, Second Edition" Gary Kessler McGraw-Hill, 1993 (2/e). ISBN 0-07-034247-4 The Basic book of ISDN (second edition) Motorola University Press Addison-Wesley Publisching company inc. ISBN 0-201-56374-6 A 48 pages booklet covering all basic questions on ISDN and some case studies on the possible installation. Can be obtained freely from Motorola sometimes. "Sensible ISDN Data Applications" Jeffrey Fritz jfritz@wvnvm.wvnet.edu West Virginia University Press "ISDN and Broadband ISDN" (2nd edition) William Stallings Macmillan ISBN 0-02-415475-X "Networking Standards: A Guide to OSI, ISDN, LAN and MAN Standards" William Stallings Addison-Wesley "A Catalog of National ISDN Solutions for Selected NIUF Applications" North American ISDN User's Forum (use NIUF information above or order via Bellcore, document GP-1, $43) and/or see info on anonymous ftp to info.bellcore.com above) The 1990 ISDN Directory and Sourcebook Phillips Publishing Inc. 7811 Montrose Road Potomac, MD 20854 (301) 340-2100 ISDN Sourcebook Information Gatekeepers Inc. 214 Harvard Ave, Boston, MA 02134 (617) 232-3111 1 800 323-1088 Bellcore National ISDN Specifications SR-NWT-001953 SR-NWT-002361 SR-NWT-002120 (National ISDN-2) US: 1-800-521-2673, other: 1-908-699-5800 Bellcore ISDN Availability Report WR-NWT-2102 ($103) US: 1-800-521-2673, other: 1-908-699-5800 Bellcore ISDN Deployment Data Special Report (SR) 2102 US: 1-800-521-2673, other: 1-908-699-5800 AT&T Technical Journal special issue on ISDN (Volume 65, Issue 1) January/February 1986 EFFector. Issue 2.01, Issue 2.06, Issue 2.08 ftp.eff.org:pub/EFF AT&T Documents -------------- "5ESS(rg.tm) Switch National ISDN Basic Rate Interface Specification - 5E8 Software Release" AT&T document number 235-900-341 "5ESS(rg.tm) Switch ISDN Basic Rate Interface Specification - 5E7 Software Release" {Custom BRI} AT&T document number 235-900-331 "5ESS(rg.tm) Switch ISDN Primary Rate Interface Specification - 5E7 Software Release" AT&T document number 235-900-332 "5ESS(rg.tm) Switch Interface Specification to a Packet Switched Public Data (X.75) Network - 5E8 Software Release" [as in CCITT X.75] AT&T document number 235-900-317 "5ESS(rg.tm) Switch X.75' Intranetwork Interface Specification - 5E8 Software Release" [as in Bellcore's TR-000310] AT&T document number 235-900-325 "5ESS(rg.tm) Switch Documentation Description and Ordering Guide" [list/description of 5ESS documents] AT&T document number 235-001-001 AT&T documents ordering: 1-800-432-6600 USA 1-800-225-1242 Canada +1 317 352-8557 elsewhere AT&T Customer Information Center Order Entry 2855 N. Franklin road Indianapolis, IN 46219 (317) 352-8484 (fax) Northern Telecom Documents -------------------------- NTP 297-2401-100 ISDN System Description NTP 297-2401-010 ISDN Product Guide --- 31) Who do I have to thank for this list? Lots of people, in one way or another. "Bob Larribeau" Eric_Boll-RXNN70Q@email.sps.mot.com (Eric Boll) Greg.Onufer@Eng.Sun.COM Helge.Oldach@Stollmann.DE (Helge Oldach) Jim.Rees@umich.edu (Jim Rees) KUMQUAT@SMCVAX.SMCVT.EDU (Gary C. Kessler) PMW1@psuvm.psu.edu (Peter M. Weiss) SYSGAERTNER@cygnus.frm.maschinenbau.th-darmstadt.de (Mathias Gaertner) apsteph@cs.utexas.edu (Alan Palmer Stephens) art@acc.com (Art Berggreen) awillis@athena.mit.edu (Albert Willis) bernot@inf-wiss.uni-konstanz.de (Gerhard Bernot) bharrell@garfield.catt.ncsu.edu (Ben Harrell) blsouth!klein@gatech.edu (Michael Klein) bob_clemmons@smtp.esl.com (Bob Clemmons) cherkus@UniMaster.COM (Dave Cherkus) cliff@Berkeley.EDU (Cliff Frost) craig@aland.bbn.com (Craig Partridge) cstorry@gandalf.ca (Chuck Storry) curt@kcwc.com (Curt Welch) dank@blacks.jpl.nasa.gov (Dan Kegel) dav@genisco.gtc.com (David L. Markowitz) dave@philips.oz.au dem@hep.net (David E. Martin) dror@digibd.com (Dror Kessler) dwight@hyphen.com (Dwight Ernest) earle@poseur.JPL.NASA.GOV (Greg Earle - Sun JPL on-site Software Support) eleskg@nuscc.nus.sg (Winston Seah) elitman@wam.umd.edu (Eric A. Litman) etxorst@eos.ericsson.se (Torsten Lif) fenton@combinet.com (Jim Fenton) garym@netcom.com (Gary Martin) giles@paxdata.demon.co.uk (Giles Heron) glarson@bnr.ca (Greg Larson) goldstein@carafe.enet.dec.com (Fred R. Goldstein) huntting@futureworld.advtech.uswest.com (Brad Huntting) james@kaiwan.com (James - The Keeper) jerry@watchman.sfc.sony.com (Jerry Scharf) jfritz@wvnvm.wvnet.edu (Jeffrey Fritz) jhonan@kralizec.zeta.org.au (Jamie Honan) jik@security.ov.com (Jonathan I. Kamens) jms@romana.Tymnet.COM (Joe Smith) jordan@hursley.ibm.com (Rob Jordan) jwb@capek.rdt.monash.edu.au (Jim Breen) kenow@stpaul.ncr.com (TONY KENOW) kessler@Eng.Sun.COM (Tom Kessler) ketil@edb.tih.no (Ketil Albertsen,TIH) kevin@newshost.pictel.com (Kevin Davis) kevinc@aspect.UUCP (Kevin Collins) keyman@Eng.Sun.COM (Dave Evans) keyman@doorway.Eng.Sun.COM (Dave Evans) kph@cisco.com (Kevin Paul Herbert) krowett@large.cisco.com (Kevin J. Rowett) lmarks@vnet.ibm.com (Laurence V. Marks) marc@dumbcat.sf.ca.us (Marco S Hyman) marc@Synergytics.COM (Marc Evans) mea@intgp1.att.com (Mark Anderson) mikes2@cc.bellcore.com (Mike Souryal) msun@ntmtv.com (Ming Sun) muftix@junior.bintec.de (Juergen Ernst Guenther) oj@world.std.com (Oliver Jones) p00210@psilink.com (Gerald L. Hopkins) paul@suite.sw.oz.au (Paul Antoine) peter@memex.co.uk (Peter Ilieve) pturner@eng.auburn.edu ( Patton M. Turner) pturner@eng.auburn.edu (Patton M. Turner) rachelw@spider.co.uk (Rachel Willmer) randys@access.digex.net (Randolph A. Sisto) rdavies@janus.enet.dec.com (Rob Davies) rjl@fawlty1.eng.monash.edu.au (Russell Lang) rogers@eplrx7.es.dupont.com (Wade T. Rogers) ronnie@cisco.com (Ronnie B. Kon) sanjay@media.mit.edu (Sanjay Manandhar) scott@labtam.labtam.oz.au (Scott Colwell) scotty@l5next.gagetalker.com (Scott Turner) sklower@toe.CS.Berkeley.EDU (Keith Sklower) sorflet@bnr.ca (winston (w.l.) sorfleet) spike@coke.std.com (Joe Ilacqua) stamp@cc.bellcore.com (stamp,scott) tnixon@microsoft.com (Toby Nixon) turtle@newshub.sdsu.edu (Andrew Scherpbier) varney@ihlpf.att.com (Al Varney) we34329@is1.vub.ac.be (Sven De Kerpel) wb8foz@scl.cwru.edu (David Lesher) welch@watchtower.Berkeley.EDU (Sean N. Welch) whs70@cc.bellcore.com (sohl,william h) wmartin@nsa.bt.co.uk (William Martin) ---- Dave Cherkus UniMaster, Inc. cherkus@unimaster.com -- Dave Cherkus UniMaster, Inc. cherkus@unimaster.com