TITLE	'BIDIRECT. VERSION SHOW'

; CP/M-86 translation using XLT86 05/22/83 H.M. Van Tassell
; use GENCMD BISHOW 8080 CODE[M240] 64*128+400H OF CODE

; CHANGED TO USE WYSE-100/200 SCRL KEYS BUT YOU CAN USE ANY
; KEYS TO SCROOL JUST MAKE SURE MESSAGES MATCH YOUR CHOICE
; ALSO CHECK THAT CLRSCR SEQUENCE WORKS ON YOUR TERMINAL
; HI-BIT MASKING ADDED SO WILL PRINT WORDSTAR FILES
;
; BISHOW.A86
;
;A buffered, bidirectional version of SHOW.ASM.
;Ver 1.0, 23 Aug 82
;Phil Cary, 748 Kenilworth Parkway, Baton Rouge, LA  70808
;Ver 1.1, 30 Mar 83 added BDOS function 6 W.F.McGee
;
; Begin code
;
M	EQU	Byte Ptr 0[BX]		;xlt86 way to make 'M'
;
false	EQU	0
true	EQU	not false
;
; BDOS equates
;
boot	EQU	0			;warm boot
wrcon	EQU	2			;console write
bdos	EQU	5			;bdos entry
open	EQU	15			;open file
readr	EQU	33			;read file random access
stdma	EQU	26			;set dma address
;
; FCB equates
;
fcb	EQU	05ch			;default fcb drive number
fcbfn	EQU	fcb+1			;start of filename
fcbft	EQU	fcb+9			;start of filetype
fcbex	EQU	fcb+12			;current extent number
fcbcrr	EQU	fcb+33			;current record number, random access
;
; ASCII equates
;
cr	EQU	0dh			;carriage return
lf	EQU	0ah			;line feed
eof	EQU	01ah			;end of file
esc	EQU	01bh			;escape
bell	EQU	07h			;bell
;
;
; Operational equates
;
maxsec	EQU	64			;number of sectors in buffer
;
	ORG	100h
;
	JMPS	start			;skip over next subroutine
mes0	DB	esc,'*','$'		;Wyse-100/200 terminal.
					;.. change as required
clrscr:	mov	dx,offset mes0		;code to erase screen and home cursor
	call	prnstr
	RET
;
start:	CALL	clrscr			;clear the screen
	CALL	opnfil			;open file in default fcb
	XOR	AL,AL			;get a 0
	MOV	Byte Ptr lincnt,AL	;store in line count
	MOV	Byte Ptr .fcbex,AL	;zero current extent
	MOV	Byte Ptr .fcbcrr,AL	;zero current record
	MOV	Byte Ptr .fcbcrr+1,AL	;..both bytes
	MOV	Byte Ptr .fcbcrr+2,AL	;..and the overflow
	CALL	filbuf			;fill the disk buffer
;
wrtfwd:	MOV	BX,(Offset dskbuf)	;point to beginning of buffer
wrtfwd1:MOV	AL,M			;get a character
	CMP	AL,eof			;if it is EOF
	JZ	getcmd			;..loop for another command
	LAHF				;save character from BDOS clobber
	XCHG	AL,AH
	PUSH	AX
	XCHG	AL,AH
	CALL	ctype			;put it on console
	POP	AX			;get character
	XCHG	AL,AH
  	and	al,7fh
	CMP	AL,cr			;see if end of line
	JZ	fwdcnt			;yes, count line
wrtfwd2:INC	BX			;no, bump buffer
	MOV	DX,fulbuf		;get end of buffer address
	MOV	AL,DH			;compare high
	CMP	AL,BH			;..order bytes
	JNZ	wrtfwd1			;if not equal, continue
	MOV	AL,DL			;else compare low
	CMP	AL,BL			;..order bytes
	JNZ	L_1	
	CALL	filbuf			;if end of buffer, go refill
L_1:
	JZ	wrtfwd			;..and start at beginning of buffer
	JMPS	wrtfwd1			;else, continue with next character
;
fwdcnt:
	MOV	AL,Byte Ptr lincnt	;get number of lines displayed
	INC	AL			;bump it
	MOV	Byte Ptr lincnt,AL	;..and store it
	XCHG	BX,DX			;save the buffer pointer
	MOV	BX,Offset linmax	;point to max number of line for this pass
	CMP	AL,M			;compare with line count
	XCHG	BX,DX			;restore pointer
	JNZ	wrtfwd2			;if not there, continue, else get command
	XOR	AL,AL			;zero the
	MOV	Byte Ptr lincnt,AL	;..line count
;
getcmd:
	PUSH	BX
	PUSH	DX
	PUSH	CX
getcmd1:
	MOV	CL,06
	MOV	DL,0FFH
	INT	224
	CMP	AL,00h			;char. ready?
	JZ	getcmd1
	CMP	AL,esc			;skip if esc
	JZ	getcmd1
	AND	AL,5fH			;make it upper case
	PUSH	AX			;save char
	MOV	AL,22			;set up for only 22 lines on forward
	MOV	Byte Ptr linmax,AL	;..scrolls
	POP	AX			;get char 
	POP	CX
	POP	DX
	POP	BX
	CMP	AL,'W'			;scroll forward?-WYSE-100 SCRL DOWN
	JE 	wrtfwd1			;scroll forward
	CMP	AL,'C'-40H		;CTRL C
	JE 	wrtfwd1			;scroll forward
	CMP	AL,'Z'-40H		;CTRL Z
	JE 	wrtfwd1			;scroll forward
	PUSH	AX			;else save character again
	MOV	AL,24			;set up for full screen on scroll
	MOV	Byte Ptr linmax,AL	;..backward
	POP	AX			;get character
	CMP	AL,'V'			;scroll backward?-WYSE-100 SCRL UP
	JZ	wrtbak			;yes
	CMP	AL,'R'-40H		;CTRL R
	JZ	wrtbak			;yes
	CMP	AL,'W'-40H		;CTRL W
	JZ	wrtbak			;yes
	CMP	AL,'X'			;must be exit
	JNZ	L_3	
	JMP	exit			;yes, or
L_3:
	mov	dx,offset mes1
	call	prnstr
	JMPS	getcmd			;try again for command
;
wrtbak:	MOV	AL,44
	MOV	Byte Ptr lincnt,AL
	push 	bx
	CALL	clrscr			;clear the screen
	pop	bx
wrtbak1:MOV	DX,(Offset dskbuf)	;get address of buffer start
	MOV	AL,DH			;compare high
	CMP	AL,BH			;..order bytes
	JNZ	wrtbak2			;continue if not equal
	MOV	AL,DL			;else, compare low
	CMP	AL,BL			;..order bytes
	JNZ	wrtbak2			;continue if not equal
	JMPS	filbak			;..and go write it
wrtbak2:MOV	AL,M			;get a character
 	and	al,7fh
	CMP	AL,cr			;see if end of line
	LAHF				;decrement buffer
	DEC	BX
	SAHF
	JNZ	wrtbak1			;..and loop if not
;
bakcnt:	MOV	AL,Byte Ptr lincnt	;else, get number of lines to move back
	DEC	AL			;..and decrement it
	MOV	Byte Ptr lincnt,AL	;..store it
	JNZ	wrtbak1			;..and loop if not there
	INC	BX			;else bump pointer to account for lf with cr
	JMP	wrtfwd1			;..and go write a screen
;
filbak:	MOV	DX,maxsec		;get the buffer size
	MOV	BX,Word Ptr seccnt	;..and number of sectors last read
	ADD	BX,DX			;add them
	XCHG	BX,DX			;..and put them in DE
	MOV	AL,Byte Ptr .fcbcrr	;subtract low order byte 
	SUB	AL,DL			;..from current record count
	MOV	Byte Ptr .fcbcrr,AL	;..and store in current record count
	MOV	AL,Byte Ptr .fcbcrr+1	;same with high order byte
	SBB	AL,DH			;..but with borrow
	JS	filbeg			;if beyond beginning of file, go zero count
	MOV	Byte Ptr .fcbcrr+1,AL	;else, store high order byte
	CALL	filbuf			;fill the buffer
	MOV	BX,fulbuf		;..and point to end of buffer
	CALL	clrscr			;clear the screen
	JMPS	wrtbak2			;continue moving back in file
;				
filbeg:	XOR	AL,AL			;if beyond beginning of file
	MOV	Byte Ptr .fcbcrr,AL	;..zero the current record field
	MOV	Byte Ptr .fcbcrr+1,AL
	MOV	Byte Ptr lincnt,AL	;..and the line count
	CALL	filbuf			;fill the buffer again
	JMP	wrtfwd			;..and go write it
;
filbuf:	MOV	DX,(Offset dskbuf)	;load start of disk buffer
	MOV	CH,maxsec		;number of sectors to resd
	MOV	BX,0			;zero out the
	MOV	Word Ptr seccnt,BX	;..number of sectors in buffer
filbuf1:PUSH	BX			;save all
	PUSH	DX			;..registers from
	PUSH	CX			;..BDOS clobber
	MOV	CL,stdma		;set dma to
	INT	224			;..disk buffer
	MOV	DX,fcb			;set up to read
	MOV	CL,readr		;..a record
	INT	224			;do it
	CMP	AL,0			;read OK?
	MOV	BX,Word Ptr .fcbcrr	;get current record number
	LAHF				;..bump it
	INC	BX
	SAHF
	MOV	Word Ptr .fcbcrr,BX	;..and save it
	MOV	BX,Word Ptr seccnt	;get sectors in buffer
	LAHF				;bump it
	INC	BX
	SAHF
	MOV	Word Ptr seccnt,BX	;store it
	JNZ	rderr			;no, last sector read
	POP	CX			;yes, get sector count
	DEC	CH			;decrement it
	POP	DX			;get de off stack to expose return address
	POP	BX			;
	JNZ	L_4	
	RET				;if done return
L_4:
	MOV	BX,128			;else, add 128 to
	ADD	BX,DX			;..dma address
	XCHG	BX,DX			;put it in de
	JMPS	filbuf1			;read another sector
;
rderr:	POP	CX			;restore
	POP	DX			;..registers
	POP	BX			;..and
	XOR	AL,AL			;..get a zero to direct to start of buffer
	RET				;..on ret
;
opnfil:	MOV	AL,Byte Ptr .fcbfn	;point to first letter of filename
	CMP	AL,' '			;anything there?
	JZ	help			;no, give help message
	MOV	DX,fcb			;file name in default fcb
	MOV	CL,open			;set up to open
	INT	224			;do it
	CMP	AL,0ffh			;open OK?
	JZ	L_5	
	RET				;yes
;
L_5:	mov	dx,offset mes2
	call	prnstr
	JMP	exit1			;leave msg on screen on exit
;
help:	mov	dx,offset mes3
	call	prnstr
	JMP	exit1
;
prnstr:	push	bx			;print string
	push	cx
	mov	cl,9
	int	224
	pop	cx
	pop	bx
	ret
;
ctype:	PUSH	CX			;Save the registers
	PUSH	DX			;..from bdos
	PUSH	BX			;..clobber
	CMP	AL,'O'-40H		;wordstar uses ^O
	JNE	NOTCO			;as non-break space
	MOV	AL,' '			;..so substitute space
NOTCO:	AND	AL,7FH			;strip hi-bit
	MOV	DL,AL			;set up character
	MOV	CL,wrcon		;..to send to console
	INT	224			;do it
	POP	BX			;restore
	POP	DX			;..the registers
	POP	CX
	RET
;
exit:	CALL	clrscr			;clear the screen
exit1:	MOV	CL,0			;warm boot
	MOV	DL,0
	INT	224
L_6	EQU	$
	DSEG
	ORG	Offset L_6
;
;
mes1	DB	cr,lf,lf,'Use the SCRL keys (or ^C,^R) to go forward and '
	DB	'backward, or X to exit.',cr,bell,'$'
;
mes2	DB	cr,lf,lf,'Requested file is not on this disk.',cr,lf,bell
	DB	'Please check your spelling or use DIR.',cr,lf,lf,bell,'$'
;
mes3	DB	'Correct usage of SHOW',lf,lf
	DB	'    A>SHOW filename  ',cr,lf,lf
	DB	'After first page is displayed, use SCRL down (^C) to go'
	DB	' forward',cr,lf
	DB	'and SCRL up (^R) for backward, or X to exit.'
	DB	cr,lf,lf,bell,'$'
;
; Memory allocation
;
seccnt	DW	0			;number of sectors read into buffer
linmax	DB	24			;number of to write lines on console
lincnt	DB	0			;line number on write or move back in buffer
dskbuf	EQU	(Offset $)		;disk buffer area above the program
fulbuf	EQU	(Offset dskbuf)+(maxsec*128)	;need to know end of buffer
;
	END