************************************************************ ** ENU ***************************************************** ************************************************************ * * Intel(R) INF Installation Utility * Installation Readme * * NOTE: This document refers to systems containing the * following Intel chipsets: * Intel(R) 810 Chipset * Intel(R) 810E Chipset * Intel(R) 820 Chipset * Intel(R) 840 Chipset * * Intel(R) 430TX PCIset * Intel(R) 440BX AGPset * Intel(R) 440DX AGPset * Intel(R) 440EX AGPset * Intel(R) 440GX AGPset * Intel(R) 440LX AGPset * Intel(R) 440MX Chipset * Intel(R) 440ZX AGPset * * ************************************************************ ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. Overview 2. Contents of the Distribution Package 3. System Requirements 4. Installing the Software 4A. Installing the Software in Interactive Mode 4B. Installing the Software in Silent Mode 5. Verifying Installation of the Software 6. Identifying the Software Version Number 7. Troubleshooting ************************************************************ * 1. OVERVIEW ************************************************************ The Intel(R) INF Installation Utility installs to the target system the Windows* INF files that outline to the operating system how the chipset components shall be configured. This is needed for the proper functioning of the following features: - Core PCI and ISAPNP Services - AGP Support - IDE/ATA33/ATA66 Storage Support - USB Support - Identification of Intel Chipset Components in Device Manager ************************************************************ * 2. CONTENTS OF THE DISTRIBUTION PACKAGE ************************************************************ The Intel(R) INF Installation Utility package contains the following items: File(s) ------- INFINST_ENU.ZIP README.TXT RELNOTES.TXT The version of the software included in the distribution package is specified in the file RELNOTES.TXT. RELNOTES.TXT is available in English only. After installation on a Windows* 95 or Windows 98 system, one or more of the following INF files are copied to the \INF directory: File(s) ------- 440MXCOR.INF 440MXIDE.INF 440MXUSB.INF 810.INF 810B.INF 820.INF 820B.INF 840.INF ICHx.INF ICHxIDE.INF ICHxSMB.INF ICHxUSB.INF IFWH.INF IHOST.INF P64H.INF P64HRES.INF PIIXXIDE.INF PIIXXUSB.INF PIIX4.INF *** NOTE: Only the files that reference the currently detected devices are copied to the system. One or more of the following digital signature files are installed to the \CATROOT directory on a Windows 98 system ONLY: File(s) ------- 440MXCOR.CAT 440MXIDE.CAT 440MXUSB.CAT 810.CAT 820.CAT 820B.CAT 840.CAT ICHx.CAT ICHxIDE.CAT ICHxSMB.CAT ICHxUSB.CAT IFWH.CAT P64H.CAT P64HRES.CAT *** NOTE: Only the files that reference the currently detected devices are copied to the system. ************************************************************ * 3. SYSTEM REQUIREMENTS ************************************************************ 1. The software included with this distribution package is designed to operate with the following chipset configurations: Intel(R) 810 Chipset Intel(R) 810E Chipset Intel(R) 820 Chipset Intel(R) 840 Chipset Intel(R) 430TX PCIset Intel(R) 440BX AGPset Intel(R) 440DX AGPset Intel(R) 440EX AGPset Intel(R) 440GX AGPset Intel(R) 440LX AGPset Intel(R) 440MX Chipset Intel(R) 440ZX AGPset 2. One of the following operating systems must be installed on the system: Windows 95 4.00.950 (Original Release) Windows 95 4.00.950a (OSR1) Windows 95 4.00.950b (OSR2 without USB Supplement) Windows 95 4.00.950b (OSR2.1 with USB Supplement) Windows 95 4.00.950c (OSR2.5 with or without USB Supplement) Windows 98 4.10.1998 (Original Release) Windows 98 Second Edition 4.10.2222 (Original Release) Windows Millennium 4.90.2380 (Beta 1) 3. It is recommended that the software be installed on systems with at least 32MB of system memory. 4. It is recommended that there is sufficient hard disk space in the directory (typically C:\WINDOWS\TEMP) on the system on which this software is installed. Please check with your system provider to determine which operating system and Intel chipset are used in your system. ************************************************************ * 4. INSTALLING THE SOFTWARE ************************************************************ This software can be installed in two modes: Interactive or Silent. The Interactive Mode requires user input during installation; the Silent Mode requires NO user input. ************************************************************ * 4A. INSTALLING THE SOFTWARE IN INTERACTIVE MODE ************************************************************ 1. Check the System Requirements. The operating system must be fully installed and running on the system before running this software. 2. Close any running applications. Otherwise, you may experience difficulties. 3. Unzip the InstallShield* installation program files into a temporary directory. 4. Run the InstallShield installation program, SETUP.EXE. 5. You will be prompted to agree to the license agreement. If you do not agree, the Installer will exit before extracting any files. 6. Follow the on-screen instructions and use the default settings to complete the setup, once the operating system has rebooted. 7. This completes the installation of the Intel(R) INF Installation Utility. ************************************************************ * 4B. INSTALLING THE SOFTWARE IN SILENT MODE ************************************************************ 1. Check the System Requirements. The operating system must be fully installed and running on the system before running this software. 2. Close any running applications. Otherwise, you may experience some difficulties. 3. Unzip the InstallShield* installation program files into a temporary directory. 4. Run the InstallShield installation program: SETUP.EXE -b -s (for silent install with auto-reboot) - OR - SETUP.EXE -s (for silent install without auto-reboot) 5. The utility will perform the necessary updates and record the installation status in the following system registry key: HKEY_LOCAL_MACHINE\Software\Intel\INFInst 6. If the utility was invoked with the "SETUP -b -s" mode, the system will automatically reboot if the update was successful. NOTE: The system MUST be rebooted for all device updates to take effect. 7. To determine whether the install was successful, verify the 'install' value in the registry key specified in Step 5. The following table describes the various parameter values: Value Type Data Description ------ ---- ---- ----------- install String "success" The installation was successful. "fail" The installation was not successful. No INF files were copied to the system. reboot String "Yes" A reboot is required to complete the installation. "No" No reboot is required to complete the installation. version String The current version number of the Intel(R) INF Installation Utility ************************************************************ * 5. VERIFYING INSTALLATION OF THE SOFTWARE ************************************************************ NOTE: This procedure is common to Windows 98, Windows 98 Second Edition and Windows 95 systems. Run Device Manager to verify the correct installation and usage of the INF files. 1. Click on Start 2. Select Settings 3. Select Control Panel 4. Double-click on System icon 5. Click on Device Manager tab 6. Click on View devices by Connection button 7. Click on Plug and Play BIOS, or Advanced Configuration and Power Interface (ACPI) BIOS 8. Click on PCI bus 9. Check the descriptions for the following entries: *** NOTE: If you see PCI standard ISA bridge you will need restart your system and re-run the software. *** NOTE: Device Manager will only display the names for devices currently detected in the system. Intel(R) 82801AA I/O Controller Hub: Intel(r) 82801AA LPC Interface Controller Intel(r) 82801AA Ultra ATA Controller Intel(r) 82801AA USB Universal Host Controller Intel(r) 82801AA SMBus Controller Intel(r) 82801AA PCI Bridge *** NOTE: Depending on the system type, the 'AA' in the above five lines may be replaced by 'AB' Intel(R) 810 Chipset: Intel(r) 82810 System and Graphics Controller -or- Intel(r) 82810 DC-100 System and Graphics Controller Intel(R) 810E Chipset: Intel(r) 82810e DC-133 System and Graphics Controller Intel(R) 820 Chipset: Intel(r) 82820 Processor to I/O Controller Intel(r) 82820 Processor to AGP Controller Intel(R) 840 Chipset: Intel(r) 82840 Processor to I/O Controller Intel(r) 82840 Processor to AGP Controller Intel(r) 82840 PCI Bridge Intel(R) 82806AA PCI 64-bit Hub: Intel(r) 82806AA Advanced Programmable Interrupt Controller Intel(r) 82806AA PCI Bridge Intel(r) 82806AA Controller (reserved) Intel(R) 440MX Chipset: Intel(r) 82440MX Processor to I/O Controller Intel(r) 82440MX PCI to ISA Bridge Intel(r) 82440MX Power Management Controller Intel(r) 82440MX Bus Master IDE Controller Intel(r) 82440MX USB Universal Host Controller Intel(R) 82371AB Controller: Intel(r) 82371AB PCI to ISA bridge (EIO mode) Intel(r) 82371AB PCI to ISA bridge (ISA mode) Intel(r) 82371AB Power Management Controller Intel(r) 82371AB/EB/MB PCI Bus Master IDE Controller Intel(r) 82371AB/EB/MB PCI to USB Universal Host Controller Intel(R) 82371EB, 82371MB Controllers: Intel(r) 82371EB/MB PCI to ISA bridge (EIO mode) Intel(r) 82371EB/MB PCI to ISA bridge (ISA mode) Intel(r) 82371EB/MB Power Management Controller Intel(r) 82371AB/EB/MB PCI Bus Master IDE Controller Intel(r) 82371AB/EB/MB PCI to USB Universal Host Controller Intel(R) 82371SB Controllers: Intel(r) 82371SB PCI to ISA bridge Intel(r) 82371SB PCI Bus Master IDE Controller Intel(r) 82371SB PCI to USB Universal Host Controller Intel(R) 430TX PCIset: Intel(r) 82443TX Processor to PCI bridge Intel(R) 440BX AGPset, Intel(R) 440DX AGPset, Intel(R) 440ZX AGPset: Intel(r) 82443BX/ZX/DX Processor to PCI bridge Intel(r) 82443BX/ZX/DX Processor to AGP controller Intel(R) 440GX AGPset: Intel(r) 82443GX Processor to PCI bridge Intel(r) 82443GX Processor to AGP controller Intel(R) 440LX AGPset: Intel(r) 82443LX Processor to PCI bridge Intel(r) 82443LX Processor to AGP controller 10. On certain systems, the following device may also be updated: Intel(R) 810, Intel(R) 810E, Intel(R) 820, and Intel(R) 840 Chipset: a. Click on View devices by Connection button b. Click on Plug & Play BIOS, or Advanced Configuration and Power Interface (ACPI) BIOS c. Verify that the following entry is present: Intel(r) 82802 Firmware Hub Device -OR- Intel(r) Security Driver ************************************************************ * 6. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ The version of the software included in the distribution package is specified in the file RELNOTES.TXT. RELNOTES.TXT is available in English only. ************************************************************ * 7. TROUBLESHOOTING ************************************************************ It is assumed that the system requirements from Section 3 above have been satisfied. Issue: System locks up during Device Manager Remove or during restart. Solution: System lockup can occur during Restart as a result of several possible system issues. In the event of system lockup, restart the machine and view Device Manager. If devices are listed properly and system experiences no further problems, then .INF file restore process was successful. If devices are not configured correctly try re-running the procedures outlined in Section 4. If this does not fix problems or further problems are experienced, re-install the operating system. Issue: After running the setup program and rebooting the machine, Windows reports that it cannot find one of the following files: ESDI_506.pdr Solution: Click Browse in the dialog box where this problem occurs, locate the \System\IOSubsys directory and click OK. The system should be able to locate this file in this directory and continue re-enumerating for the new devices. Issue: After running the setup program and rebooting the machine, Windows reports that it cannot find one of the following files: UHCD.SYS USBD.SYS USBHUB.SYS Solution: Click Browse in the dialog box where this problem occurs, locate the \System32\drivers (for Windows 98) -or- \System (for Windows 95) directory and click OK. The system should be able to locate this file in this directory and continue re-enumerating for the new devices. Issue: During setup, installation stops and prompts for one of the following files: UHCD.SYS USBD.SYS USBHUB.SYS Solution: Ensure that the Windows 95 USB Supplement has been installed prior to running the INF Installation Utility setup program. Issue: After running the setup program and rebooting the machine, Windows reports that it cannot find one of the following files: isapnp.vxd Solution: Click Browse in the dialog box where this problem occurs, locate the \System directory and click OK. The system should be able to locate this file in this directory and continue re-enumerating for the new devices. Issue: After performing the silent install, the HKLM\Software\Intel\InfInst key was not created or the data of the value "install" is not "success". Solution: This is caused by one of the following scenarios: - the current system does not contain a supported operating system, or - the current system does not contain a supported chipset Verify the System Requirements in Section 3. ************************************************************ ************************************************************ * DISCLAIMER ************************************************************ Intel is making no claims of usability, efficacy or warranty. The INTEL SOFTWARE LICENSE AGREEMENT (OEM / ISV Distribution & Single User) completely defines the licensed use of this software. ************************************************************ Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. ************************************************************ Intel Corporation disclaims all warranties and liabilities for the use of this document and the information contained herein, and assumes no responsibility for any errors which may appear in this document, nor does Intel make a commitment to update the information contained herein. Intel reserves the right to make changes to this document at any time, without notice. ************************************************************ ************************************************************ * Third-party brands and names are the property of their respective owners. Copyright (c) Intel Corporation, 1997-1999